User Manual Q&AAnswer
Feb 25, 2025 - 01:39 AM
To adjust the height of the saddle on the KAYOBA 022231 Children's Bike, follow these steps:
1. Locate the clamping xxxx that holds the saddle post to the saddle tube.
2. Loosen the clamping xxxx to release the saddle post.
3. Set the saddle post to the desired height.
4. Tighten the clamping xxxx to secure the saddle post in place.
5. Use a 6 mm hex key or a 13 mm hex spanner to tighten the saddle post clamping xxxx and nut to 30 Nm.
6. Check that the saddle post is securely fastened by trying to turn the saddle by hand. It should not be possible to turn the saddle.
7. Never ride the bike if the saddle or saddle post are not properly tightened.
Note: The saddle post should be lower than the marking for the top position, and the marking should not be visible when the saddle post is fitted. Ensure that the saddle post is inserted far enough into the fork tube so that the marking cannot be seen.
Add New Comment