Answer

Feb 25, 2025 - 01:36 AM
To connect the Thermokon RS485 Modbus Logger Software to your computer, follow these steps:
1. Connect the Thermokon USB transceiver RS485 to a free USB interface on your computer.
2. The device will be automatically installed with a driver from the Windows-internal driver library. You will be notified about the completion of the driver installation in the system tray.
3. If the installation does not start automatically or no driver is found, you will need to manually install the driver. You can download the current driver from the following website: [http://www.ftdichip.com/Drivers/VCP.htm](http://www.ftdichip.com/Drivers/VCP.htm)
Please note that the software will only start if a USB transceiver or device with a valid license is found in the network. Make sure to check the driver installation and download/install drivers for your system if necessary.
For more detailed instructions and information, refer to the Thermokon RS485 Modbus Logger Software User Manual.
Add New Comment