User Manual Q&AAnswer
Feb 25, 2025 - 01:35 AM
To install the Fisher & Paykel AHS-ASBI-A Contemporary Round Door Handle for Integrated French Door Refrigerator Freezer, please follow the steps below:
1. Ensure that you have all the necessary components for installation, including the handle kit, screws, and a screwdriver.
2. Start by removing any existing handles or hardware from the refrigerator freezer doors.
3. Take the handle kit and align it with the pre-drilled holes on the refrigerator freezer doors. Make sure the handle is positioned correctly and level.
4. Insert the screws provided into the holes on the handle and tighten them using a screwdriver. Ensure that the screws are securely fastened to hold the handle in place.
5. Repeat the process for the other door if applicable.
6. Once both handles are installed, double-check their alignment and make any necessary adjustments.
7. After installation, test the handles by gently pulling on them to ensure they are securely attached.
Please note that these instructions are a general guideline, and it's always recommended to refer to the specific user guide or installation manual provided by Fisher & Paykel for detailed and model-specific instructions.
Add New Comment