User Manual Q&AAnswer
Feb 25, 2025 - 01:08 AM
To install the CLDBARS6FS Street Legal Light Bar Fog + Strobe, follow these steps:
1. Determine suitable mounting locations to install the LED light bar, wiring harness, and switch panel.
2. Once all mounting locations are confirmed, connect the wires as shown in the wiring diagram provided in the manual.
3. Properly insulate the connections to ensure safety.
4. Connect the positive and negative wires properly.
5. Press the switch buttons to test if each mode is functioning properly.
6. Adjust the light to the desired angle and then secure it by tightening all mounting screws.
7. There are three flash patterns available: Hyper Burst, Quick Strobe, and Slow Strobe.
8. To switch between the flash patterns, turn the strobe light off for at least 2 seconds, then quickly turn the strobe switch ON-OFF-ON, and the strobe light will switch to the next pattern.
9. The light bar has a memory function, which means the last running strobe mode is automatically saved as the default strobe mode.
For more information and detailed instructions, please refer to the CLDBARS6FS Street Legal Light Bar Fog + Strobe User Manual.
Add New Comment