User Manual Q&AAnswer
Feb 25, 2025 - 01:05 AM
To install the TRIO 242910180 LED Wall Lamp Lugo 1x12W, please follow these steps:
1. Before starting the installation, make sure to read the safety instructions provided in the manual.
2. Identify the location where you want to install the wall lamp. Ensure that there is a suitable power supply nearby.
3. Turn off the power supply to the area where you will be installing the lamp.
4. Remove the lamp cover by gently pulling it away from the base.
5. Connect the wires from the wall lamp to the power supply. Make sure to match the correct wires (usually black to black and white to white) and secure them tightly using wire connectors.
6. Carefully place the lamp base onto the wall, aligning it with the mounting holes. Use screws and wall anchors (if necessary) to securely attach the base to the wall.
7. Once the base is securely mounted, attach the lamp cover back onto the base by aligning the slots and gently pushing it into place.
8. Turn on the power supply and test the lamp to ensure it is working properly.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instructions provided in the product manual for accurate installation steps.
Add New Comment