Answer

Feb 25, 2025 - 01:03 AM
To program new channels into the Wouxun KG-UV9PX, you can follow these steps:
1. Switch to the FREQ-VFO Display Mode by pressing the TDR|V/M key.
2. Use the Channel xxxx , ▲▼ keys, or 1-9 keys to select or enter the desired frequency.
3. Set any other desired parameters in the Function Menu, such as modulation bandwidth, transmit power, and squelch.
4. Write the frequency to a channel by pressing the MENU key and selecting [MENU 30_MEM-CH | 001-999]. New/unused channels will display in an alternate color.
5. Use the Channel xxxx , ▲▼ keys, or 1-9 keys to select the memory channel you want to write the frequency to.
6. Press the MENU key to write the frequency to the selected memory channel.
7. Repeat these steps for each new channel you want to program.
Note: Not all menu functions can be set in all display modes. Some functions, such as shift direction and offset frequency, are only available in the FREQ-VFO Mode.
For more detailed instructions and options, you can refer to the Wouxun KG-UV9PX user manual.
Add New Comment