User Manual Q&AAnswer
Feb 25, 2025 - 01:01 AM
To assemble the Bionix 136642 OtoClear SprayWash Kit, please follow these steps:
1. Remove the SprayWash bottle and the spray head from the packaging.
2. Grasp the water reservoir firmly.
3. Turn on the water source.
4. Fill the reservoir with body temperature water. Note: The temperature gauge on the bottle will indicate if the water temperature is within the acceptable range.
5. After filling, place the water reservoir on a secure and stable platform.
6. Grasp the head and guide the tube into the opening on the water reservoir until fully inserted.
7. Point the head and wand in the same direction as the larger end of the reservoir base.
8. Secure the head with one hand and rotate the blue fastening ring at the base of the head clockwise until tight.
9. Grasp the OtoClear Tip and twist it onto the luer lock fitting of the adapter until it stops.
Add New Comment