User Manual Q&AAnswer
Feb 25, 2025 - 12:45 AM
To mount the Raritan DKX3-UST User Station onto a monitor, follow these steps:
1. Turn off and disconnect all devices from the power sources, including the monitor.
2. Attach the VESA mount securely to the back of your monitor using four appropriate screws.
3. Align two xxxx holes on each side of the Dominion User Station with those on the VESA mount.
4. Tighten two sides securely using four appropriate screws.
5. The Dominion User Station is now securely attached to the monitor.
Please note that the VESA mount is optional and the Dominion User Station can be used without it. Make sure to use the appropriate VESA standards (75 or 100 mm) for your monitor. For more detailed instructions, refer to the user guide provided by Raritan.
Add New Comment