How do I assemble the NOVA LIFE 32911-005-71 Interior Floor Lamp? (NOVA LIFE 32911-005-71 Interior Floor Lamp Instruction Manual)

Answer

manuals.plus

Feb 25, 2025 - 12:31 AM


To assemble the , follow these steps:

1. Before starting the assembly, make sure to disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.

2. Lay out all the parts included in the package: 
   - Part A: The fixture with wire (1 piece)
   - Part B: Marble base
   - Part C: Wrench
   - Part D: Cross Screwdriver
   - Light source: 230V E14 5 x 40W Max (not included)

3. Place the marble base (Part B) on a soft, non-abrasive surface such as carpet or cardboard.

4. Attach the fixture with wire (Part A) to the marble base by aligning the holes on the fixture with the corresponding holes on the base.

5. Insert the screws provided into the holes and tighten them using the wrench (Part C) or the cross screwdriver (Part D). Make sure the fixture is securely attached to the base.

6. Once the lamp is assembled, you can install the light source. The recommended light source is a 230V E14 bulb with a maximum wattage of 40W (not included). Alternatively, you can use an LED bulb.

7. After assembling and installing the light source, you can now connect the lamp to power. Turn on the power at the circuit breaker or fuse box.

8. To activate the lamp, simply turn on the light switch.

Please note that it is important to follow the instructions on the label of the lamp regarding the type and wattage of bulbs to use. Also, remember to turn off the lamp before replacing the bulb and wait until the bulb has cooled down to avoid burns.