User Manual Q&AAnswer
Feb 25, 2025 - 12:30 AM
To assemble the DAEMA RCC-801ER Vacuum Cleaner, follow these steps:
1. Attach the Flexible Hose: Connect the flexible hose into the air intake duct of the vacuum cleaner until you hear a "click", indicating it is locked in place.
2. Fit the Stainless Steel Telescopic Tube to the Curved Wand/Hose Extension: Push the stainless steel telescopic tube into the curved wand/hose extension.
3. Extend the Stainless Steel Telescopic Tube: Push forward on the plastic button and pull the inner stainless steel telescopic tube outward to extend it.
4. Fit the Floor Brush to the Telescopic Tube: Push the telescopic tube into the floor brush and adjust the tube to the desired length.
Once all attachments are in place, unwind a sufficient length of cable and insert the plug into a wall outlet. A yellow mark on the power cord indicates the ideal cable length. Do not pull the power cord beyond the red mark.
To start using the vacuum cleaner, press the power on/off button located on the unit. To rewind the power cord, press the cord rewind button while guiding the cord to prevent whipping and potential damage or injury.
Please refer to the DAEMA RCC-801ER Vacuum Cleaner User Manual for more detailed instructions and safety precautions.
Add New Comment