User Manual Q&AAnswer
Feb 25, 2025 - 12:26 AM
To reset the TP-Link VIGI WiFi Network Camera, follow these steps:
1. Rotate the sphere and unfasten the two fixed screws to remove the cover.
2. Locate the RESET button on the camera.
3. Press and hold the RESET button for several seconds until the Status LED starts blinking red quickly.
4. Release the RESET button.
After the camera has been reset, it will revert to its default settings, including the default password. You can then set up the camera again and configure a new password.
Note: Resetting the camera will erase all previous settings and configurations. Make sure to backup any important data or settings before performing the reset.
Add New Comment