User Manual Q&AAnswer
Feb 25, 2025 - 12:20 AM
To install the Crest Smart Ambient Lighting Light Bar, you have two options: free-standing installation or adhesive mount installation.
For free-standing installation:
1. Align the hole of the mounting base with the desired xxxx hole on the Smart Ambient Light Bar. The center hole on the Light Bar is used for mounting horizontally, and the hole at the base of the Light Bar is used for vertical mounting.
2. Insert the xxxx into the xxxx hole and tighten using the supplied Allen key to lock the Light Bar into position.
For adhesive mount installation:
1. Wipe the surface you wish to affix the Light Bar to with a clean dry cloth. It is recommended to wipe the back of the Light Bar as well for best results.
2. Use the two stickers provided. Remove the backing from one side of the sticker and affix it to the rear of the Light Bar. For best results, follow the recommended sticker positions.
3. Remove the backing paper from the other side of the sticker and press firmly against the mounting surface you wish to affix the Light Bar to for a minimum of one minute.
Please refer to the Crest Smart Ambient Lighting User Manual for visual illustrations and additional information on the installation process.
Add New Comment