User Manual Q&AAnswer
Feb 25, 2025 - 12:06 AM
To set the timer on the PEREL E305D Digital Weekly Timer, follow these steps:
1. Setting the Time:
- Rotate the dial in a clockwise direction to set the current time.
- Each dash between the numbers represents 15 minutes.
- For example, if it is 2pm, set the dial at 14.
2. Setting the Timer:
- The timer delay is determined by the black push segments around the dial.
- Each segment represents 15 minutes.
- Push down all the segments for the time you want the connected appliance to be switched on.
- For example, if you want the connected appliance to be switched on at 9am and switched off at 6pm, push down all the segments between 9 and 18 in ascending order.
3. Connecting and Using the Timer:
- Make sure the timer is switched off.
- Connect the timer to the mains.
- Connect the appliance to the timer.
- Switch on the appliance.
- Finally, switch on the timer.
Please note that the PEREL E305D Digital Weekly Timer should not be connected to an appliance with a load exceeding 16A. It is also recommended not to connect heaters or similar appliances to the timer. Always ensure the plug of the connected appliance is fully inserted into the timer.
For more detailed information and safety instructions, please refer to the PEREL E305D Digital Weekly Timer User Manual.
Add New Comment