User Manual Q&AAnswer
Feb 25, 2025 - 12:02 AM
To pair the SVEN E-702BT True Wireless Earbuds with your device, follow these steps:
1. Remove both headphones from the charging case and put them back in the case to activate the headphones.
2. Make sure there is no protective film on the headphone contacts.
3. Ensure that the headphones and the charging case are fully charged before pairing.
4. Interconnect the device with a signal source (e.g., phone, notebook, smartphone) to transfer signals via Bluetooth.
5. Put the headphones back in the charging case and then take them out. Both earphones will automatically turn on and connect to each other. The LED indicator on the right earphone will alternate between blue and red glow.
6. On your device, enable Bluetooth and select the Bluetooth device search mode.
7. Look for the "SVEN E-702BT" message on your device's screen and select it to connect.
8. If the connection is successful, you will hear a short beep signal in the headphones, and the search mode indication on the headphones will end. If no devices are connected, the headphones will automatically turn off after 2 minutes.
Note: Some devices may require you to enter the "0000" code to connect via Bluetooth. The availability of this feature depends on your phone.
For more detailed instructions and information, please refer to the SVEN E-702BT True Wireless Earbuds User Manual provided with your purchase.
Add New Comment