User Manual Q&AAnswer
Feb 24, 2025 - 11:43 PM
To connect the lamps to the Velleman K5200 4 Channel Sequencer, follow these steps:
1. Identify the voltage of your lamps. The circuit supports a voltage range of minimum 12V and maximum 240V AC.
2. Connect one pole of the lamp voltage to the "VAC N" terminal on the circuit board. If your lamps are powered by mains, make sure to connect the neutral conductor to this terminal.
3. Ensure that there are no short-circuits in the lamp circuits before proceeding. A short-circuit can damage the triacs even with a fast-acting fuse.
4. Once you have verified the lamp circuits, connect the mains power to the "MAINS" terminals on the circuit board.
Please note that when testing or working with the circuit, it is important not to touch any components to avoid electric shock. Mount the circuit into a plastic housing, use a bipolar mains switch, and include a mains fuse for safety.
For further details and illustrations, refer to the Velleman K5200 4 Channel Sequencer manual.
Add New Comment