User Manual Q&AAnswer
Feb 24, 2025 - 11:41 PM
Sure! Here are the step-by-step instructions for installing the TORO 08140 Side View Mirror Kit:
1. Preparing the Machine:
- Park the machine on a level surface.
- Shift the transmission lever to the P (Park) position.
- Shut off the engine and remove the key.
2. Installing the Mirror:
- Use 2 screws to secure the mirror to the mirror bracket.
- Use 2 screws to secure the mirror bracket to the ROPS (Roll-Over Protective Structure) bracket.
- Torque each xxxx to 26 N∙m (228 in-lb).
To clarify the components mentioned in the instructions:
- Mirror: This refers to the actual mirror component that provides the reflective surface.
- xxxx : These are the fasteners used to secure the mirror and mirror bracket to the ROPS bracket.
- Mirror bracket: This is the bracket that holds the mirror in place.
- ROPS bracket: This is the bracket on the machine's Roll-Over Protective Structure where the mirror bracket is attached.
Please refer to the TORO 08140 Side View Mirror Kit Instruction Manual for any additional information or illustrations that may assist you during the installation process.
Add New Comment