User Manual Q&AAnswer
Feb 24, 2025 - 11:29 PM
To adjust the temperature on the ClimaRad Vita H1C-S unit, you can use the control panel located on the top of the device. The unit is designed to work automatically, so the temperature is typically set by the installer during the initial setup. However, if you need to make adjustments, follow these steps:
1. Locate the temperature control button on the control panel. It is usually labeled with a temperature symbol or the word "Temp."
2. Press the temperature control button to activate the temperature adjustment mode.
3. Use the up and down arrows or the +/- buttons on the control panel to increase or decrease the temperature setting. The current temperature setting should be displayed on the control panel.
4. Once you have set the desired temperature, press the temperature control button again to confirm and save the new setting.
Please note that the specific buttons and steps may vary slightly depending on the model and version of the ClimaRad Vita H1C-S unit you have. For more detailed instructions, refer to the user manual provided by ClimaRad or contact their customer support for assistance.
Add New Comment