User Manual Q&AAnswer
Feb 24, 2025 - 11:27 PM
To install the SERVICE FIRST Wall Mount Flagpole Solar Power Light on your flagpole, please follow these steps:
1. Remove the solar power light from the box and remove all packaging material. The batteries are pre-installed and will have some charge.
2. Turn the light to the ON position.
3. Take the light into a dark room while it is in the ON position. The light should turn on automatically. The solar light has a photocell that allows it to turn on when it is dark.
4. Remember that the light is designed to work in the dark. If there is ambient light, the LEDs may appear dim or not turn on at all.
5. Install the light on top of your Wall Mounted Flag Pole by using the finial to secure the light to the pole.
6. The light will require a full day of sun before the batteries are fully charged. Once fully charged, the light will have a run time of 10-16 hours.
Please note that these instructions are provided as a general guide. For more specific instructions or troubleshooting, refer to the manual that came with your SERVICE FIRST Wall Mount Flagpole Solar Power Light.
Add New Comment