User Manual Q&AAnswer
Feb 24, 2025 - 11:23 PM
To connect multiple batteries to the Pytes E-Box 48100R Solar Storage System, you need to follow these steps:
1. Ensure that the battery power switch is off before starting the installation process.
2. Each battery should be connected to a Bus Bar when installing multiple batteries. This helps in distributing the power evenly among the batteries.
3. Connect the power cable and ground cable to each battery, ensuring that the connections are secure.
4. Connect the communication cable to the CAN or RS485 port on the Pytes E-Box 48100R, depending on the communication type of your inverter.
5. Make sure to connect the master battery and the inverter using the communication cable.
6. Double-check the pin order of the communication cable to ensure it is correct.
7. Set the DIP switch on the Pytes E-Box 48100R based on the inverter you have installed. Refer to the manual for the specific DIP switch settings.
8. Before starting the battery, ensure that the connection to the inverter is correct and secure.
Please refer to the Pytes E-Box 48100R Solar Storage System Installation Guide for detailed instructions and illustrations on how to properly connect multiple batteries to the system.
Add New Comment