User Manual Q&AAnswer
Feb 24, 2025 - 11:21 PM
To connect the Radial Studio-Q Talkback Interface with Built-In Mic to your recording system, follow these steps:
1. Turn off your audio equipment or turn down all volume controls before making connections.
2. Connect the output from your recording system to the Studio-Q using either balanced ¼” TRS or unbalanced ¼” TS cables. A balanced connection will typically yield about 6dB more gain.
3. From the Studio-Q, connect the program output to your headphone amplifier.
Note: It is important to check for power by depressing the MIC switch. The LED above will illuminate, indicating that the unit is powered on.
For more detailed information and illustrations, please refer to the "Making Connections" section in the Radial Studio-Q User Guide.
Add New Comment