User Manual Q&AAnswer
Feb 24, 2025 - 11:20 PM
To install the ZLINE 52736 Under Cabinet Range Hood, please follow the steps outlined in the user manual. Here is a complete guide on how to install the range hood:
1. Before installation, ensure that the power supply is turned off.
2. Determine the desired height for the range hood. The recommended height is between 24 and 36 inches above the cooking surface.
3. Mark the location for the range hood on the underside of the cabinet. Ensure that there is enough space for the hood to fit properly.
4. Drill pilot holes for the mounting screws using a 1/8-inch drill bit.
5. Attach the mounting bracket to the underside of the cabinet using the provided screws.
6. Connect the electrical wiring. The range hood should be connected to a dedicated 120V, 60Hz, 15A circuit.
7. Lift the range hood and align it with the mounting bracket. Slide the hood into place and secure it with the provided screws.
8. Adjust the position of the range hood to ensure it is level and centered.
9. Install the chimney cover if required. The chimney cover should be installed according to the specific instructions provided in the manual.
10. Turn on the power supply and test the range hood to ensure it is functioning properly.
Please note that these instructions are a general guideline. For more detailed and specific instructions, please refer to the user manual that came with your ZLINE 52736 Under Cabinet Range Hood.
Add New Comment