User Manual Q&AAnswer
Feb 24, 2025 - 11:06 PM
To change the saw blade on the Makita DSP600ZJ Cordless Plunge Cut Saw, please follow the instructions below:
1. Ensure that the tool is turned off and the battery cartridge is removed.
2. Press the shaft lock button to lock the shaft.
3. Use the wrench provided to loosen the blade bolt by turning it counterclockwise.
4. Remove the blade bolt, outer flange, and saw blade.
5. Place a new saw blade onto the spindle, ensuring that the teeth are facing in the correct direction.
6. Install the outer flange onto the spindle, aligning the flange with the blade.
7. Insert the blade bolt and tighten it securely by turning it clockwise with the wrench.
8. Release the shaft lock button.
Please note that it is important to use the correct size and type of saw blade recommended for the Makita DSP600ZJ Cordless Plunge Cut Saw. Refer to the instruction manual or consult with a Makita authorized dealer for further assistance.
Add New Comment