User Manual Q&AAnswer
Feb 24, 2025 - 10:57 PM
To change the temperature setting on the SEALEY HS104K.V2 2000W Deluxe Hot Air Gun with LCD Display, follow these steps:
1. Connect the hot air gun to the power supply and ensure that the On/Off switch is in the '0' position.
2. Set the switch to the desired setting, either position '1' for a fixed temperature of 80°C or position '2' for a variable temperature range of 80-600°C.
3. Rotate the temperature dial to the desired temperature setting. The LCD display will show the current temperature.
4. Start at a lower temperature and gradually increase it if necessary, depending on the task at hand.
5. Allow a short period for the hot air gun to reach the desired temperature, using the LCD display as a reference.
Note: It is recommended to test the hot air gun on a small non-critical area first to ensure the desired temperature and results are achieved.
Add New Comment