User Manual Q&AAnswer
Feb 24, 2025 - 10:22 PM
To assemble the Hoover BH53602V Black and Decker Car Vacuum Cleaner, follow these steps:
1. Attach the extension wand: Insert the smaller end of the extension wand into the opening at the front of the vacuum cleaner until it clicks into place.
2. Attach the desired accessory: Choose the appropriate accessory for your cleaning needs. Attach it either directly to the handheld unit or to the end of the extension wand.
3. Charge the battery: Before using the vacuum cleaner, make sure to fully charge the battery. Connect the charger to the charging port on the vacuum cleaner and plug it into a power outlet. Allow the battery to charge until the indicator light shows a full charge.
4. Empty the dirt cup: When the dirt cup is full, remove it from the vacuum cleaner by pressing the release button. Empty the dirt and debris into a trash bin.
5. Clean the filter: Rinse the filter with warm water and let it dry for 24 hours before reinstalling. Make sure to install the filter cover before reattaching the dirt cup.
Remember to always remove the battery pack from the product when connecting or disconnecting accessories to avoid any potential personal injury. For more detailed instructions and safety precautions, refer to the user guide provided with the Hoover BH53602V Black and Decker Car Vacuum Cleaner.
Add New Comment