User Manual Q&AAnswer
Feb 24, 2025 - 10:03 PM
It is recommended to replace the 3-in-1 True HEPA filter in the Sunbeam SAP0950WH Fresh Control Air Purifier every 12 months, depending on usage. The filter replacement indicator light and air quality indicator will flash when it's time to replace the filter. To replace the filter, turn off and unplug the air purifier, locate the filter cover on the bottom of the unit, rotate the xxxx counterclockwise to remove the cover, remove and discard the old filter, insert a new filter, re-align the filter cover, and turn the xxxx clockwise to close. Finally, plug the unit back in and turn the power on. Remember to press and hold the filter replacement button for 3 seconds to reset the filter status on the air purifier. Only use the original Sunbeam filter model SAPF360D specifically intended for this appliance and do not use any other filters. Information on where to purchase replacement filters can be found on the Sunbeam website.
Add New Comment