User Manual Q&AAnswer
Feb 24, 2025 - 09:42 PM
To install the batteries in the CAISSA Electric with Gel Ball Blaster, follow these steps:
1. Make sure you have the rechargeable batteries provided by CAISSA. Only these batteries should be used.
2. Locate the battery pack on the blaster.
3. Identify the positive and negative poles of the battery pack. The red line indicates the positive "+" pole, and the black line indicates the negative "-" pole.
4. Connect the battery pack to the blaster, ensuring that the positive and negative poles are aligned correctly.
5. Use the USB charging cable provided to charge the batteries. When charging, the red light will be on, and the green light will flash. Once fully charged, both the red and green lights will be on for a long time.
6. It is important not to disassemble the battery pack without permission and to use the recommended charging cable for charging.
7. Remember not to overcharge the batteries, as this can damage them. The power terminals must not be short-circuited, and the batteries should not be directly hit or thrown into fire.
8. Always fully drain the battery before charging and remove the exhausted battery from the blaster if it will not be used for a long time.
Please refer to the user manual for more detailed instructions and safety precautions regarding battery installation and usage.
Add New Comment