Answer

Feb 24, 2025 - 09:36 PM
To bind the FLYSKY FMS-R3A 10-Inch Transmitter with the receiver, follow these steps:
1. Put the transmitter into binding state. Please refer to the manual of your specific transmitter model for instructions on how to do this.
2. Power on the receiver to put it into binding mode. When the receiver is powered on, the receiver LED will flash quickly, indicating that it is in binding mode.
3. The binding process is complete when the transmitter LED stops flashing and remains solid on.
4. After binding, check to ensure that the transmitter and receiver are working correctly. If you encounter any issues or unexpected operation, you can repeat the binding process by following the steps above.
Note: If the transmitter disconnects from the receiver, the transmitter LED will enter a three-flash-one-off state. To re-establish the connection, first, set the transmitter to its binding state and then set the receiver to its binding state. If the binding process is not completed within 10 seconds, the LED of the receiver will enter a slow flashing state.
Please refer to the user manual for more detailed instructions and illustrations on the binding process.
Add New Comment