User Manual Q&AAnswer
Feb 24, 2025 - 09:21 PM
To set up the HILTI DD VP-U Vacuum Pump, follow these steps:
1. Find a suitable location with a smooth and dry supporting surface.
2. Ensure that the cooling air inlet and outlet have at least 20 cm clearance from walls and other obstructions.
3. Secure the vacuum pump against slippage.
4. Check the water level in the water separator and empty it if necessary.
5. Connect the vacuum connector on the vacuum base plate to the vacuum pump.
For more detailed instructions and illustrations, please refer to the "Setting up vacuum pump" section in the HILTI DD VP-U Vacuum Pumps Instruction Manual.
Add New Comment