Answer

Feb 24, 2025 - 09:19 PM
To properly load and use the CAISSA MP-7 Electric with Gel Ball Blaster, please follow the steps outlined in the user manual:
1. Adjusting handle: Make sure the handle is adjusted to a comfortable position for your grip.
2. Electric Ammunition Feeding: After adjusting the handle, ensure that the electric ammunition feeding mechanism is functioning properly. This mechanism allows the gel balls to be fed into the blaster for firing.
3. Battery Installation: Install the batteries according to the instructions provided in the manual. Make sure to use the recommended batteries or batteries that are equivalent.
4. Clip Installation: Install the clip into the blaster securely. Ensure that it is properly aligned and locked in place.
5. Water Gel Ball Formation Process: Before loading the gel balls, soak them in water for 3-4 hours to allow them to expand to the recommended size of 7-8mm. This will prevent jamming issues. After soaking, manually press the starting device to load the gel balls into the blaster's track. Any remaining gel balls should be poured out after use.
Please note that it is important to read and follow all the safety instructions provided in the manual. Do not aim at the eyes or face when playing, avoid shooting people and animals at close range, and do not shoot at fragile targets. Additionally, do not modify the blaster's ejection device and use only the recommended projectiles.
If you have any further questions or encounter any issues with the product, you can contact the store or customer service for assistance. They will be able to provide you with the necessary support, including replacing missing accessories or damaged parts. The product also comes with a 3-month warranty, so if you experience any problems, reach out to customer service for a replacement.
Remember to always prioritize safety and follow the guidelines provided in the manual to ensure a safe and enjoyable experience with the CAISSA MP-7 Electric with Gel Ball Blaster.
Add New Comment