User Manual Q&AAnswer
Feb 24, 2025 - 09:07 PM
To set the parameters for the SmartGen MGC100 Genset Controller, follow these steps:
1. Press and hold the "Page/Confirm" button for more than 3 seconds to enter the parameter configuration menu.
2. Use the "Up" and "Down" buttons to select the desired parameter number.
3. Press the "Page/Confirm" button to enter the parameter setting menu.
4. Use the "Up" and "Down" buttons to increase or decrease the parameter value. You can double-click the buttons to change the value faster.
5. Press the "Page/Confirm" button to confirm the modification and save the value.
6. Repeat steps 2-5 for any other parameters you want to set.
7. After setting all the parameters, press and hold the "Page/Confirm" button for 3 seconds to exit the parameter setting status.
Note: The SmartGen MGC100 Genset Controller user manual provides a list of parameter numbers, their range, and default values. Refer to Table 7 in the manual for more details on the parameters and their settings.
Add New Comment