User Manual Q&AAnswer
Feb 24, 2025 - 10:44 AM
To install the Englefield ESG_TLT Electronic Bidet Seat Plus, please follow the installation instructions provided in the user manual. Here is a step-by-step guide:
1. Ensure that you have an RCD or GFCI electrical protection installed before proceeding with the installation.
2. Make sure that the water supply pressure is between 220-500kPa.
3. Install a High Hazard Backflow Prevention device (not supplied) in compliance with AS/NZS 3500.1.
4. Replace the water filter every 6 months with part # DH97-00552C.
5. Connect the bidet seat to the water supply using the provided water supply hose.
6. Use the fixing kit to securely attach the bidet seat to your toilet.
7. Mount the LCD display remote control on the wall using the wall mount bracket.
8. Familiarize yourself with the various features and settings of the bidet seat by referring to the quick start user guide.
Please note that it is important to clean and wash the bidet seat thoroughly before and after each use. The bidet seat does not protect against bacteria, viruses, or other disease organisms.
For any further assistance or clarification, please refer to the Englefield ESG_TLT Electronic Bidet Seat Plus User Manual.
Add New Comment