Answer

Feb 24, 2025 - 09:59 AM
To set the time and date on your U-BOAT Classico 1001 Dive Watch, follow these steps:
1. Unscrew the cap crown A to gain access to the crown B.
2. Position 1 (Neutral Position): Unscrew the crown B to wind and start the watch.
3. Position 2 (First Click): Carefully pull the crown B right out to the first click. Turn the crown B clockwise to set the date F.
4. Position 3 (Second Click): Carefully pull the crown B right out to the second click and turn the crown B to set the exact time.
5. After setting the time and date, fully depress the crown B to move it back into the neutral position.
6. Gently xxxx in the crown B. xxxx in the cap crown A until firmly in place.
Please note that it is important to follow the instructions provided in the manual to avoid any damage to the watch. If you have any further questions or encounter any difficulties, it is recommended to contact an Authorized Retailer/Authorized Service Centre for assistance.
Additionally, the manual suggests taking your watch to an Authorized Retailer/Authorized Service Centre every 3-4 years for a check-up and ordinary maintenance on all mechanical parts. They can also assist with changing the strap if needed.
Remember to avoid exposing your watch to large temperature variations, humidity, the sun, and strong magnetic fields. After coming into contact with seawater, rinse the watch thoroughly. Automatic watches may require manual winding following a long period of inactivity.
For further information or support, you can visit the U-BOAT official website and register your watch in the U-Club area to gain access to additional benefits, news, events, and offers.
Add New Comment