User Manual Q&AAnswer
Feb 24, 2025 - 07:53 AM
To mount the Leonton EG5-1600-M12XB-67, EG5-1600-M12XB-T67 device on a wall, please follow these steps:
1. Unpack the industrial Ethernet switch from the original packing box.
2. Prepare 4 screws for mounting the switch to a wall. It is recommended to use M5 screws.
3. Based on the physical dimensions provided in the manual (Figure 3.2), mark the positions of the 4 xxxx holes on the left and right side of the switch on the wall.
4. Insert the screws through the xxxx holes on the switch and xxxx the switch into the wall.
5. Make sure to tighten the screws securely to ensure the switch is properly mounted.
6. Once the switch is mounted on the wall, you can proceed with the power and Ethernet connections as described in the manual.
Note: Before mounting the device on a wall, make sure to disconnect all cables from the switch.
Add New Comment