User Manual Q&AAnswer
Feb 24, 2025 - 07:47 AM
To charge the Milwaukee M18 18V Lithium-Ion Cordless 3600-Watt power supply, follow these steps:
1. Connect the 120V power cord to the AC input of the power supply.
2. Insert one or more battery packs into the available battery pack slots. Make sure they latch securely into place. The fuel gauge on each battery pack indicates the level of charge.
3. The power supply will automatically start charging the battery packs. The LEDs for the corresponding charging indicators will light up.
4. After charging is complete, the charge indicator light will be illuminated green. The power supply will keep the battery packs fully charged if left on the charger.
5. If the charge indicator light flashes red and green, check that the battery pack is fully seated into the bay. Remove and reinsert the battery pack. If the problem persists, unplug the charger for at least 2 minutes, then plug it back in and insert the battery pack.
6. If the charge indicator light does not come on, check that the battery pack is fully seated into the bay. Remove and reinsert the battery pack. If the charge indicator light still does not come on, unplug the charger for at least 2 minutes, then plug it back in and insert the battery pack. If the problem persists, contact a Milwaukee service facility.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment