User Manual Q&AAnswer
Feb 24, 2025 - 07:41 AM
To load the battery on the Televes H30 Crystal Digital Processing Handheld DVB Meter and Analyzer, follow these steps:
1. Locate the battery compartment on the device. It is usually located on the back or bottom of the meter.
2. Open the battery compartment by sliding or lifting the cover.
3. Insert the provided rechargeable battery pack into the compartment, ensuring that the contacts align properly.
4. Close the battery compartment cover securely.
Note: It is recommended to fully charge the battery before initial use. Connect the meter to a power source using the provided charger and allow it to charge until the battery is fully charged.
For more detailed instructions and illustrations, please refer to the user guide provided with the Televes H30 Crystal Digital Processing Handheld DVB Meter and Analyzer.
Add New Comment