User Manual Q&AAnswer
Feb 24, 2025 - 07:37 AM
To set up the iQ-Flatlight for optimal performance, follow these steps:
1. Install the iQ-LED software on your PC before connecting the hardware.
2. Connect the power cord to the power outlet on the side of the iQ-Flatlight.
3. Connect the USB cable from the Flatlight to your PC and turn on the Flatlight.
4. Connect the USB cable from the spectrometer calibration device to your Flatlight.
5. The system will install the spectrometer and iQ-LED driver on your PC.
6. Start the iQ-LED software by clicking the 'iQ-LED.exe' or the iQ-LED icon on your desktop.
7. Follow the instructions in the iQ-LED software manual to control your iQ-Flatlight.
For more detailed instructions on setting up and using the iQ-Flatlight, please refer to the Image Engineering iQ-Flatlight Illumination Device User Manual.
Add New Comment