Answer

Feb 24, 2025 - 07:19 AM
To connect the Paul Neuhaus Q-Nevio LED table lamp with dimmer and CCT to the electrical supply, follow these steps:
1. Ensure that the lamp is unplugged and the power switch is turned off.
2. Locate the electrical connection point on the lamp. It should be labeled as "230 voltage / 50Hz - connection."
3. Connect the lamp to a suitable power outlet with a compatible power cord. Make sure the power outlet is rated for 230V and 50Hz.
4. Once the lamp is connected, you can turn on the power switch and start using the lamp.
Please note that if you are unsure about the electrical connection or if you encounter any difficulties, it is recommended to consult a qualified electrician for assistance.
Add New Comment