User Manual Q&AAnswer
Feb 24, 2025 - 07:18 AM
To assemble the iQ-Near Focus Measurement Device, follow these steps:
1. Mount the feet of the frame to the lower frame using the provided hex keys.
2. Cover open mounting brackets and profile surfaces with the plastic caps included in the package.
3. Join the upper and lower parts of the frame by sliding the gliders into the corresponding grooves. Make sure the two hand levers are not tightened.
4. Slide the frame parts towards each other until both sides' gliders are fully seated in the groove.
5. Place the supplied profile caps on the open ends of the frame. You can use a rubber mallet to help with this step.
6. Finally, tighten the hand levers to secure the upper frame's position.
Please refer to the manual for visual illustrations and additional instructions on the assembly process.
Note: It is recommended to have another person assist you when adjusting the height of the frame.
Add New Comment