User Manual Q&AAnswer
Feb 24, 2025 - 07:17 AM
To change the filter in the FRANKISCHE Starline, please follow the instructions provided in the installation manual. Here is a step-by-step guide:
1. Make sure to turn off the water supply before starting the filter change process.
2. Locate the filter housing, which is typically located near the main water supply line.
3. Use a wrench or pliers to loosen the filter housing. Turn it counterclockwise until it is loose enough to remove.
4. Carefully remove the filter housing and set it aside.
5. Take out the old filter cartridge from the housing. Dispose of it properly.
6. Before installing the new filter cartridge, make sure to remove any protective packaging or seals.
7. Insert the new filter cartridge into the housing, making sure it is properly aligned.
8. Reattach the filter housing by turning it clockwise until it is securely tightened. Use the wrench or pliers if necessary, but be careful not to overtighten.
9. Turn on the water supply and check for any leaks around the filter housing. If there are any leaks, tighten the housing further or check the O-ring for damage.
10. Once the filter is securely installed and there are no leaks, run water through the system for a few minutes to flush out any air or debris.
11. Finally, check the manufacturer's recommendations for filter maintenance and replacement intervals to ensure optimal performance.
Please note that the above instructions are a general guide. It is always recommended to consult the specific FRANKISCHE Starline Filter Change Instruction Manual for detailed and accurate instructions for your particular model.
Add New Comment