User Manual Q&AAnswer
Feb 24, 2025 - 07:16 AM
To reverse the door swing on your Kogan KAM43LBRSF Series 43L Bar Fridge, you will need a Phillips head screwdriver, flat-blade screwdriver, and hexagonal spanner. Here are the steps to follow:
1. Remove the plastic covering from the top door hinge and unscrew the two screws from the bottom bracket. Remove the foot from the opposite side.
2. Slide the door down about 15cm and off the top hinge pin, then lift it away from the fridge.
3. Remove the two screws from the top bracket and replace them on the other side. You will need to remove the plastic caps from the other side first.
4. Slide the door back onto the top hinge, making sure it is facing the right way up. xxxx the bottom hinge into place on the new side. Replace the other foot on the other side and then replace the plastic covering by clicking it back into place on the door hinge.
5. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge.
Please refer to the user guide for visual instructions and additional information.
Add New Comment