User Manual Q&AAnswer
Feb 24, 2025 - 06:59 AM
To install the NICOR NLCSPCWNBWH Network Lighting Controls, follow these steps:
1. Turn off power to the appropriate circuit at the breaker panel.
2. Identify the location for installation and cut a 1.60” (41mm) diameter hole for the NLCSPCMOUNT2.
3. Install the NLCSPWNBWH into the NLCSPCMOUNT1 and secure it with the lock.
4. Push up the spring-arms on the side of the NLCSPCMOUNT1 and slide it into the cut hole.
5. Release the spring-arms to install the NLCSPCMOUNT1 securely.
6. Connect the low-voltage leads from NLCSPCWNBWH to the NLCPS2.
7. Turn the power ON and follow the Nicor NLC commissioning guide.
Please note that the installation should be performed by a licensed electrician, and it is important to follow all safety precautions mentioned in the instruction manual.
For more detailed instructions and diagrams, please refer to the NICOR NLCSPCWNBWH Network Lighting Controls Instruction Manual.
Add New Comment