User Manual Q&AAnswer
Feb 24, 2025 - 06:54 AM
To start charging your NISSAN CH-10 using the normal charge mode, follow these steps:
1. Ensure that the vehicle is in the P (Park) position and the parking brake is applied.
2. Turn the power switch to the OFF position. Charging will not start if the power switch is in the ON position.
3. Open the charge port lid and charge port cap. You can refer to the "Charge port lid" and "Charge port cap" sections in the "Pre-driving checks and adjustments" section of the owner's manual for more information.
4. Connect the charge connector to the charge port. If it is connected properly, you will hear a beep sound.
5. If charging has started or if the battery is waiting for the charging timer, you will hear two beeps and the charging status indicator light display will change. You can find more information about the charging status indicator lights in the manual.
Note: To stop charging mid-charge, simply remove the charge connector. Charging will automatically stop.
It is important to follow these steps and refer to the owner's manual for detailed instructions to ensure safe and proper charging of your NISSAN CH-10.
Add New Comment