User Manual Q&AAnswer
Feb 24, 2025 - 06:50 AM
To set up the administrator account on the BURG WACHTER 27511 Scan and Lock 610 Padlock with Fingerprint, please follow these steps:
1. Press the shackle down once to activate the lock.
2. Press the fingerprint sensor for around 3 seconds until the LED starts flashing blue.
3. Place your finger on the sensor to input the administrator fingerprint. Repeat this step 10 times.
4. After the 10th fingerprint input, you will hear a long beep and the LED will shine blue, indicating that the programming is finished.
5. If you encounter any issues during the programming process, such as hearing four beeps and seeing the LED flashing red, it means that the fingerprint was not registered correctly. In this case, please repeat the fingerprint input process.
Once the administrator account is set up, the lock will be individualized, and only the registered fingerprints will be able to unlock it.
Add New Comment