Answer

Feb 24, 2025 - 06:50 AM
To install the FRACARRO SWP908TS Compact 9 Inputs Switches with Active and Passive TV Gain, please follow these steps:
1. Ensure that the product is installed by a qualified person in accordance with local safety standards and regulations. Failure to do so may result in injury or damage to the product.
2. Install the product indoors and in a dry location to protect it from dripping or splashing. Humidity and condensation can damage the product, so wait until it is dry before using it if condensation occurs.
3. Handle the product carefully to avoid impacts that could damage it. Provide sufficient ventilation by leaving enough space around the product.
4. Avoid installing the product above or near heat sources, in dusty places, or where it may come into contact with corrosive substances.
5. If the unit is fixed to the wall, use proper xxxx anchors suitable for the characteristics of the fixing support. The wall and anchoring system must be able to support at least 4 times the weight of the unit.
6. Secure the appliance to the wall or floor according to the installation instructions. For permanently installed appliances, add an easily accessible cutting device to the exterior of the appliance. For appliances with a power plug, install the socket close to the appliance and easily accessible.
7. Connect the product to the grounding electrode of the antenna system in compliance with standard EN 60728-11. Use the provided xxxx marked with the symbol for this purpose. It is recommended to connect the xxxx to the main earth node of the plant and not to intermediate points.
Please refer to the FRACARRO SWP908TS Compact 9 Inputs Switches with Active and Passive TV Gain Instruction Manual for more detailed instructions and safety information.
Add New Comment