Answer

Feb 24, 2025 - 06:49 AM
1. Assembly:
- Start by unpacking the vacuum and ensuring all the components are present.
- Attach the handle to the main body of the vacuum by aligning the grooves and pushing them together until they click into place.
- Connect the cleaning wand to the handle by inserting it into the opening until it locks securely.
- Attach the desired cleaning tool, such as the DuoClean floor nozzle or the crevice tool, to the end of the cleaning wand by sliding it onto the wand until it clicks.
2. Usage:
- Plug the vacuum into a power outlet.
- Press the power button located on the handle to turn on the vacuum.
- Adjust the suction power by using the power control buttons located on the handle. There are three power settings: Low, Medium, and High.
- For cleaning floors, use the DuoClean floor nozzle. Move the vacuum back and forth over the desired area, allowing the brush rolls to pick up dirt and debris.
- For cleaning hard-to-reach areas, attach the crevice tool to the cleaning wand. Insert the crevice tool into narrow spaces, corners, or along baseboards to remove dirt and dust.
- Empty the dust cup when it becomes full by pressing the release button located on the top of the dust cup. Remove the cup, empty its contents into a trash bin, and then reattach it securely.
For more detailed instructions and safety information, please refer to the user manual provided with the Shark HZ3000UK Series Stratus DuoClean Corded Stick Vacuum.
Add New Comment