User Manual Q&AAnswer
Feb 24, 2025 - 06:48 AM
To set the timer on the ALLE LUX X5 Plus Lamp, follow these steps:
1. Connect the power supply to the lamp using the provided power adapter.
2. The lamp has a timer screen that allows you to set the desired curing time. The available timer options are 10s, 30s, 60s, and 99s (Low Heat mode).
3. Press the timer button to select the desired curing time. For example, if you want to set the timer to 30 seconds, press the timer button once.
4. The lamp will start the countdown and automatically turn off once the set time has elapsed.
5. If you need to reset the timer or put the lamp in standby mode, press the timer button again during the countdown. This will reset the time and the lamp will enter standby mode.
6. If you want to use the Low Heat mode, press the timer button until it reaches 99s. The lamp power will gradually increase during this mode.
Please note that the maximum exposure time for the lamp is 120 seconds. Also, ensure that the timer buttons are working properly before using the unit. If the timer buttons are not functioning correctly, do not use the lamp and contact customer support for assistance.
It is important to read the instruction manual provided with the lamp before using it to ensure proper usage and avoid any potential risks.
Add New Comment