User Manual Q&AAnswer
Feb 24, 2025 - 06:44 AM
To install the bluebuilt Premium Stacking Kit on your Samsung washing machine and dryer, please follow these steps:
1. Ensure that your washing machine is level before placing the stacking kit. Use a spirit level to check the levelness.
2. Stick four of the anti-slip components on the bottom of the stacking kit. If you have a Samsung washing machine, push them against the outer edge. Then, turn the stacking kit over and place it in the middle of the washing machine.
3. Roll out the strap and make sure the lever of the strap tensioner is pointing outwards.
4. Pull the strap down through the slot on the right side of the stacking kit.
5. Pull the strap underneath the washing machine, keeping it straight in the middle.
6. Next, pull the strap up through the slot on the left side of the stacking kit. Leave the strap hanging for now.
7. Apply four of the anti-slip components onto the corners of the stacking kit. Then, place your dryer in the middle of the stacking kit.
8. Tighten the strap around the top or side of your dryer as follows: Open the strap tensioner and pull the strap through the middle slot. Next, pull the strap all the way through the strap tensioner.
9. Pull the strap and tighten it around your washing machine and dryer until it's fixed in place. Do this by pulling the lever of the strap tensioner up and down.
10. Finally, place the plastic protective cover on top of the strap tensioner.
Please note that the worktop included in the kit is only suitable for a maximum weight of 10 kilograms. It should only be used for your laundry basket or to fold your laundry. Failure to follow the instructions and use the included tools may void the warranty and make Coolable not liable.
Add New Comment