How should I install the RED ARROW MET10-60 Meteor Floodlights? (RED ARROW MET10-60 Meteor Floodlights Instruction Manual)

Answer

manuals.plus

Feb 24, 2025 - 06:42 AM

To install the RED ARROW MET10-60 Meteor Floodlights, please follow the provided installation instructions:

1. Ensure that the installation is carried out by a qualified electrician in compliance with the current edition of the IEE Wiring Regulations.

2. Before installation or any maintenance, make sure that the circuit supply is isolated by removing the circuit supply fuse or turning off the applicable circuit breaker.

3. Check the total load on the circuit to ensure that the luminaire does not exceed the rating of the circuit cable, fuse, or circuit breaker.

4. If the fitting incorporates control gear, carefully size it to avoid instances of nuisance tripping of the protective device used in the installation.

5. Follow the provided installation instructions and use the fixings supplied or recommended.

6. Keep the floodlights out of reach of children.

7. Ensure there is adequate free air circulation of at least 100mm around the fitting to prevent overheating.

8. The nearest illuminated surface must be at least 0.5m from the front of the fitting.

9. Check for concealed cables before drilling any fixing holes.

10. Fix the bracket to a wall or similar hard surface.

11. Connect the cable to the power supply.

Please note that it is the installer's responsibility to consider any fire risk and take appropriate precautions. Also, make sure to comply with the maintenance instructions provided in the manual for routine cleaning and disposal of the fitting when it reaches the end of its life.