User Manual Q&AAnswer
Feb 24, 2025 - 06:38 AM
Loading nails into the HILTI BX 3 Battery actuated direct fastening tool is a simple process. Please follow the steps below:
1. Ensure that the tool is switched off and the battery is removed for safety.
2. Open the magazine by pulling the magazine release lever located on the side of the tool.
3. Slide the magazine follower back to the end of the magazine.
4. Insert a strip of nails into the magazine, ensuring that the nail heads are facing towards the tool.
5. Push the nails all the way to the end of the magazine until they are held securely by the magazine follower.
6. Close the magazine by pushing it back into place until you hear a click, indicating that it is locked.
7. Reinstall the battery and switch on the tool.
For more detailed instructions and illustrations, please refer to the "Loading the magazine" section in the HILTI BX 3 Battery actuated direct fastening tool Instruction Manual.
Add New Comment