User Manual Q&AAnswer
Feb 24, 2025 - 06:17 AM
To install the blinds2go SmartView Electric Enjoy Roller Blinds, you will need to follow these steps:
1. Fitting the brackets:
- There are two methods of installation for the brackets.
- The first method is to use the single hole in the top of the bracket to fix it to the lintel (the 'ceiling' of the recess). Make sure the protruding tab on the bracket is closest to the window.
- The second method is to join the bracket to the 'L' shaped face-fixing plate. Use two screws through the back plate to mount it onto a facing surface such as a wall or window frame.
- Note that the outermost brackets should be positioned at least 5cm away from the ends of the rail, and any other brackets should be evenly distributed across the width.
2. Fitting the blind:
- Situate the front lip of the headrail into the front of the bracket.
- Push the back of the headrail upwards to lock it into the back of the bracket.
- To release the blind from the brackets, push up firmly against the tab protruding at the bracket while twisting the back of the headrail downwards.
3. Download the SmartView App:
- On the front of the swing tag that comes with your blind, you will find a QR code.
- Scan this QR code with your phone to download the SmartView app.
- The app will allow you to set up and control your blinds easily.
For more detailed instructions and illustrations, please refer to the blinds2go SmartView Electric Enjoy Roller Blinds Installation Guide that comes with your product.
Add New Comment